Milwaukee 2737B-20 18V DC Barrel-Grip Jig Saw
Category: Jig Saws
The Milwaukee 2737B-20 18V DC Barrel-Grip Jig Saw likely outperforms other on-site renovation models. It pairs a brushless motor with M18 battery compatibility for robust cordless performance. Jig Saws remain essential for fast trim, plunge, and curve cuts on renovation sites.
Milwaukee 2737B-20 18V DC Barrel-Grip Jig Saw for Renovation Sites
The Milwaukee 2737B-20 18V DC Barrel-Grip Jig Saw suits busy remodeling crews for portability and reliable cutting. Milwaukee 2737B-20 uses brushless motor technology and orbital action to speed trim and plunge operations. This Milwaukee Jig Saw’s barrel grip reduces vibration and improves one-handed control when working on ladders or scaffolding. The tool balances steady cutting performance with manageable operator fatigue across long renovation shifts.
How long will the battery last under heavy demolition?
This Milwaukee 2737B-20 delivers approximately 10-60 minutes under heavy demolition depending on M18 battery amp-hours. A 5.0 Ah M18 pack may run 20-40 minutes during intense cutting. Higher-capacity M18 packs such as a 9.0 Ah or larger model increase runtime significantly when cutting intermittently. Users should budget extra batteries and plan swaps to avoid downtime on demolition-heavy days.
Key performance includes for fast on-site trim and plunge cuts
The Milwaukee 2737B-20 18V DC Barrel-Grip Jig Saw focuses on controllable power, orbital cutting, and versatile bevel capability for trim and plunge work. The variable-speed trigger lets operators tune stroke rate to specific blades and materials for cleaner results. A full-inch stroke gives aggressive feeding for plunge cuts while remaining controllable for final trim passes. Users benefit from the T-shank blade ecosystem for fast changes and broad blade compatibility on-site.
Key technical specifications and settings
- Voltage: 18V DC (requires M18 battery, sold separately)
- Handle type: Barrel Grip
- Blade shank type: T-Shank
- Stroke length: 1 in
- Motor: Brushless
- Speed range: 800-3,500 SPM (variable)
- Bevel angle range: 45 left to 45 right
- Tool weight: 4.5 lb; tool length: 11 45/64 in
- Power type: Cordless (battery not included); battery series: M18
Which blades give clean curved cuts in hardwood and tile?
18V DC Barrel-Grip Jig Saw accepts T-shank blades and cuts smooth hardwood curves with fine-tooth scroll blades. Milwaukee 2737B-20’s variable speed lets you slow strokes for tile work to reduce chipping and glazing. For hardwood curves, use blades around 10-14 TPI for a balance of speed and clean edges when cutting oak or maple. For tile, choose carbide-grit or diamond-grit specialty jigsaw blades and run the saw slowly with light pressure to avoid cracking the tile.
Why Milwaukee 2737B-20 18V DC Barrel-Grip Jig Saw excels outdoors
The Milwaukee 2737B-20 18V DC Barrel-Grip Jig Saw excels outdoors because cordless M18 compatibility removes extension-cord hazards on roofs and scaffolds. The barrel grip and compact mass improve operator stability in wind and on ladders, helping make accurate cuts at height. The brushless motor lowers routine maintenance and maintains power in hot or dusty conditions typical of exterior jobs. Bevel and orbital settings let crews quickly adapt to angled fascia, soffit notches, and uneven decking boards.
What routine checks prevent blade binding on dusty jobs?
This Milwaukee barrel-grip jig saw prevents binding when users clear shoe debris and inspect blade alignment. Remove dust from the shoe and baseplate after each shift with a stiff brush or compressed air to keep the soleplate flat. Check blade clamp tension, replace bent or worn blades, and confirm the T-shank seats fully to reduce lateral wobble before making cuts. Q: How match TPI? A: Higher TPI gives smoother cuts; lower TPI removes material faster. Q: Which M18 battery is best? A: Use higher-Ah M18 packs for extended runtime during demolition and continuous exterior work.