DEWALT Portable Table Saw with Stand, 8-1/4-inch, DWE7485WS
Category: Table Saws
Balancing jobsite portability with cutting capacity is a common challenge for contractors and serious DIYers. This review examines the DEWALT Portable Table Saw with Stand, 8-1/4-inch, DWE7485WS at $349 and whether its compact design delivers reliable jobsite performance. The saw is powered by a 15 A, 5800 RPM motor driving an 8-1/4-inch blade, features rack & pinion telescoping rails and supports bevel cuts up to 48 degrees for versatile cuts.
Summary
Article Verdict: DEWALT DWE7485WS suits buyers who need a portable, 8-1/4-inch saw that rips 4×8 sheet goods on a compact stand.
- Core Benefit: 24.5-inch rip capacity (rips 4×8 sheet goods), 15 A 5800 RPM motor, up to 48-degree bevel capability
- Main Drawback: Smaller blade and rip capacity compared with 10-inch models and some missing technical details
- Price Value: $349 offers lower entry price compared with the DWE7491RS at $649, favoring portability over maximum ripping capacity
The DEWALT DWE7485WS makes sense for users who need a portable table saw that still rips 4×8 sheet goods with a 24.5-inch rip capacity while fitting on a compact stand. The DEWALT Portable Table Saw on the included DW7451 heavy-duty tube steel stand is practical for on-site trim work, cabinet fitting and cutting sheet goods before installation. You should not buy DWE7485WS Table Saw if routine work requires a 10-inch blade or a larger 32-1/2-inch rip capacity for processing wider stock.
Compared to the DEWALT Table Saw 10 Inch with Rolling Stand (DWE7491RS) listed at $649, DWE7485WS is $300 cheaper at $349. The $300 difference buys a 10-inch blade, a 32-1/2-inch rip capacity and a rolling stand on the DWE7491RS, while the 8-1/4-inch portable table saw with stand emphasizes compactness and easier transport. Buyers who prioritize larger ripping capacity and a rolling stand should choose the DWE7491RS at $649, while those wanting a lighter, more compact saw for jobsite mobility are well served by this DEWALT portable table saw (DWE7485WS) at $349.
This review covers specifications, guarding and safety features, and practical use on the included DW7451 stand. While detailed warranty terms, physical dimensions, weight, power cord length, an installation guide, a compatibility list, certifications and independent performance data were unavailable, readers can check manufacturer documentation and retailer listings to verify those items.
DEWALT Portable Table Saw with Stand, 8-1/4-inch, DWE7485WS Price & Value Analysis
| Product | Price | Blade Diameter | Rip Capacity | Max Bevel Angle | Stand Included | Motor |
|---|---|---|---|---|---|---|
| DEWALT Portable Table Saw with Stand, 8-1/4-inch, DWE7485WS | $349 | 8-1/4 in | 24.5 in | 48 degree | DW7451 included | 15 A, 5800 RPM |
| Competitor A | Not Specified | Not Specified | Not Specified | Not Specified | Not Specified | Not Specified |
| Competitor B | Not Specified | Not Specified | Not Specified | Not Specified | Not Specified | Not Specified |
The DEWALT DWE7485WS is priced at $349 and sits in the mid-range for portable table saws. At $349, the DEWALT Portable Table Saw is $124.60 (56%) above the average Table Saws price of $224.40.
Market Trend: Historical price fluctuation for DEWALT Portable Table Saw with Stand, 8-1/4 inch, up to 48-Degree Angle Cuts (DWE7485WS) over the last three months.
Industry Comparison: How DEWALT Portable Table Saw with Stand, 8-1/4 inch, up to 48-Degree Angle Cuts (DWE7485WS) compares to competing models in the same category.
The DWE7485WS Table Saw delivers an 8-1/4 in blade, a 15 A, 5800 RPM motor, and a 24.5 in rip capacity designed to rip 4×8 sheet goods. The DWE7485WS ships with the DW7451 stand, the SITE-PRO guarding system, riving knife, anti-kickback pawls, miter gauge, and push stick, which are notable inclusions at this price. While safety features like power-loss reset are listed, specific warranty terms and weight were not available at the time of this analysis.
Table saws in this portable category commonly sell from about $150 to $600, depending on motor size and included accessories. The DEWALT Portable Table Saw at $349 aligns with models that bundle a rack & pinion fence and a heavy-duty stand instead of bare benchtop units.
Competitor pricing data unavailable for comparison. Direct price comparison unavailable; positioning as mid-range based on the $349 price point for this DEWALT portable table saw (DWE7485WS).
For budget-conscious buyers, the DEWALT DWE7485WS at $349 is more costly than basic benchtop saws under $200 but includes a stand and greater rip capacity. For value-seekers who prioritize portability, rack & pinion fence accuracy, and an included DW7451 stand, the DEWALT Portable Table Saw offers a balanced utility-to-cost ratio. For premium buyers focused on heavy-duty production, a larger 10-inch contractor saw at higher price points may provide greater durability per dollar.
Overall, the reviewed DEWALT DWE7485WS table saw represents a mid-range investment for users who need portability, a 24.5 in rip capacity, and jobsite-ready guarding. Tradespeople and DIYers who regularly rip sheet goods and need an included stand will likely find the $349 price justified.
Cutting Performance & On-site Results
The DEWALT Portable Table Saw with Stand, 8-1/4-inch, DWE7485WS is positioned for on-site carpentry and trim work. Based on the product’s compact design_notes and included DW7451 stand, the saw targets portability and fast setup.
Cutting power and speed depend on the 15 A, 5800 RPM motor and the 8-1/4 in blade. DEWALT DWE7485WS, based on that motor specification and blade size, should provide typical category cutting torque for 3/4 in hardwoods and softwoods. Products with a 15 A, 5800 RPM motor in this class typically sustain near-rated RPM under normal loads, suggesting steady cut speed for rip and crosscuts.
Rip capacity and fence accuracy derive from the listed 24.5 in rip capacity and the rack & pinion telescoping rails. The DEWALT Portable Table Saw uses the rack-and-pinion fence, and based on that mechanism, expect repeatable lateral alignment within a few millimetres when properly adjusted. Typical rack-and-pinion fences in this category reduce fence walk during long rips and make riving knife alignment simpler.
Bevel range and angled cuts come from the stated up to 48 degree max_bevel. The DWE7485WS Table Saw, based on the max_bevel spec, enables compound bevel cuts beyond the common 45° limit, though bevel accuracy depends on the saw’s bevel scale and calibration. Products offering a 48° bevel typically require careful setup for precise finish carpentry bevels.
Safety, guarding, and on-board features are tied to the SITE-PRO guarding system and included riving knife and anti-kickback pawls. DWE7485WS, with those safety_features listed, provides modular blade guarding and anti-kickback protection; these items, based on manufacturer claims, reduce kickback risk when used correctly. The on-board storage for the blade guard, wrenches, and push stick supports organized jobsite use.
Jobsite framing: Based on the 24.5 in rip_capacity and 15 A motor, the reviewed DEWALT DWE7485WS table saw can rip dimensional lumber and plywood panels efficiently. For framing studs and sheathing, the saw’s portability and DW7451 stand speed up staging and teardown.
Finish carpentry: Based on the 8-1/4 in blade and SITE-PRO guarding system, this DEWALT portable table saw (DWE7485WS) suits trim and casing work where narrow cuts and bevels are common. Precision tasks depend on fence calibration and blade quality; use a fine-tooth blade for cleaner edges.
Sheet goods and rip work: Based on the 24.5 in rip_capacity, the 8-1/4-inch portable table saw with stand will handle rip cuts of 4×8 sheet goods when supported. For long rips, ensure outfeed support and slow feed to avoid binding because the smaller table surface gives less workpiece support than full-sized saws.
Performance analysis limited by missing performance_data. Based on the available spec (15 A, 5800 RPM motor; 24.5 in rip capacity; 8-1/4 in blade), expect a conservative estimate rather than an optimistic claim. Data regarding weight was not available at the time of this review.
Ease of Use & Installation
DEWALT Portable Table Saw with Stand, 8-1/4-inch, DWE7485WS requires intermediate mechanical skills and takes approximately 20–40 minutes to secure the saw to its stand. DEWALT DWE7485WS also needs access to a 15 A circuit for operation and basic workshop space for safe setup.
Step-by-step installation overview and missing instructions
DEWALT Portable Table Saw installation notes state: fasten the saw to the included DW7451 stand using support bar hardware holes and hardware holes are provided. Detailed installation instructions not included in product documentation. DWE7485WS Table Saw ships with on-board storage for blade guard assembly, wrenches, miter gauge, and push stick which helps keep required items at hand.
Required tools and tricky steps are partly implied by the package contents. DWE7485WS includes blade change wrenches, but a socket or screwdriver is commonly needed to tighten stand hardware and those specific tools are not listed in the documentation.
Professional installation recommendation and constraints
For most DIY users, DIY DWE7485WS installation is feasible when comfortable with basic hand tools and aligning the rack & pinion telescoping fence. the reviewed DEWALT DWE7485WS table saw may still benefit from professional help if you cannot lift or align a 24.5 in rip-capacity table or if your workshop lacks a grounded 15 A circuit. Installation difficulty cannot be confirmed without detailed instructions, so choose professional installation if you need guarantee or inspection.
Learning curve and daily operation
8-1/4-inch portable table saw with stand operation becomes straightforward after 1–2 hours of hands-on practice with the blade, riving knife, and anti-kickback pawls. this DEWALT portable table saw (DWE7485WS) uses familiar controls and a SITE-PRO modular guarding system, though new users will need time to learn bevel adjustments up to 48 degrees and fence locking.
Maintenance is basic and predictable: keep the blade and table surface clean, check fence alignment, and store the blade guard and wrenches on-board. DEWALT DWE7485WS has a power-loss reset feature that reduces accidental restarts but routine blade checks remain necessary.
Compared with larger cabinet saws, the DWE7485WS setup is simpler but more involved than true plug-and-play tools. For search intent like “how to install DEWALT Portable Table Saw with Stand” and “do I need professional installation for DWE7485WS,” expect moderate effort and basic tool skills.
Benefits & Use Cases: Who Should Buy DEWALT Portable Table Saw with Stand, 8-1/4-inch, DWE7485WS ?
The DEWALT DWE7485WS is a compact jobsite table saw with an 8-1/4 in blade and a 15 A, 5800 RPM motor. The rack & pinion fence and 24.5 in rip capacity support ripping full 4×8 sheet goods.
Jobsite framing and sheet ripping
For carpenters who cut plywood and OSB on site, the DWE7485WS table saw delivers a 24.5 in rip capacity and the rack & pinion fence for fast layout. The DW7451 stand and compact build reduce setup time and ease transport between jobs.
Bevel cuts and trim work up to 48 degrees
Finish carpenters who need bevel cuts will find the DWE7485WS Table Saw supports up to a 48 degree bevel angle for jambs and scribing. The riving knife and anti-kickback pawls help maintain cut control during angled cuts.
Portable workshop for homeowners and DIYers
Weekend renovators who need a portable saw with storage can use this DEWALT Portable Table Saw to rip boards and crosscut molding in a garage. On-board storage for the blade guard, wrenches, and miter gauge keeps consumables with the saw.
Small woodworking and cabinet projects
Hobbyist woodworkers building cabinets benefit from the SITE-PRO guarding system and non-through cut riving knife for safer detail work. The 8-1/4 in blade suits selective dados and narrow ripping where a full 10 in saw is overkill.
Mobile installers and safety-conscious users
Cabinet installers and mobile contractors who move gear between sites gain from the power-loss reset feature that prevents accidental restart after power interruptions. The heavy-duty tube steel DW7451 stand offers stable support on uneven floors.
Professional carpenter profile
Framers and subcontractor carpenters who require fast setup and the ability to rip 4×8 sheets will choose DEWALT DWE7485WS for its 24.5 in rip capacity and 5800 RPM motor. The rack & pinion fence and DW7451 stand suit frequent relocation and heavy use.
Weekend DIYer profile
Homeowners who perform periodic remodels and need portability will find the DWE7485WS Table Saw compact and easy to store. The included miter gauge and push stick reduce accessory purchases for basic projects.
Hobbyist/cabinetmaker profile
Cabinetmakers working in small shops who value safety features will use the reviewed DEWALT DWE7485WS table saw for detail cuts and beveling to 48 degree. The SITE-PRO guarding system and riving knife address finer work safety without large-footprint equipment.
The rack & pinion fence, 15 A motor, 8-1/4 in blade, and 24.5 in rip capacity directly map to faster setup, cleaner rip cuts, and safer bevel work. Data regarding warranty terms was not available at the time of this review.
The DWE7485WS is not suited for high-volume cabinet shops that need a full-size 10 in cabinet saw or continuous-duty motors for conveyorized production.
Strengths & Weaknesses
The DEWALT Portable Table Saw with Stand, 8-1/4-inch, DWE7485WS is presented as a compact jobsite table saw with features aimed at framers and finish carpenters. This summary lists the key advantages and disadvantages to help decide whether the DEWALT DWE7485WS fits specific workshop or jobsite needs.
What We Like
Motor output and sustained speed
The 15 A, 5800 RPM motor provides rated rotational speed under load. This power level aligns with portable table saw standards and supports continuous ripping of plywood and dimensional lumber. Jobsite carpenters and remodelers performing repeated cuts benefit from the consistent torque provided by the DEWALT Portable Table Saw.
Large rip capacity for sheet goods
The 24.5 in rip capacity allows ripping full 4×8 sheet goods down the long edge. This capacity meets a common benchmark for on-site sheet processing without a separate table or outfeed. Cabinetmakers and contractors who frequently cut plywood will find the DWE7485WS Table Saw practical for layout and dimensioning tasks.
Standard blade diameter for portable saws
The 8-1/4 in blade size keeps the saw’s footprint and kerf similar to comparable portable models. The smaller blade diameter contributes to a more compact table and lower overall material removal per pass. DIYers and tradespeople who value transportability and storage will appreciate the DWE7485WS compact blade package.
Expanded bevel capability
The saw offers up to a 48 degree bevel capacity for angled cuts. This bevel range exceeds the more common 45 degree limit on many portable saws and adds flexibility for trim and specialty miters. Finish carpenters and trim installers needing angled cuts on-site will benefit from this extended bevel range on the 8-1/4-inch portable table saw with stand.
Rack & pinion telescoping fence accuracy
The rack & pinion telescoping rails provide repeatable fence positioning across the full 24.5 in rip range. Rack-and-pinion systems typically deliver finer lateral adjustment and less play than sliding tube fences on portables. Woodworkers requiring accurate long rips and consistent repeat cuts will benefit from the precise fence action on the reviewed DEWALT DWE7485WS table saw.
Modular guarding and included accessories
The SITE-PRO modular guarding system includes a riving knife and anti-kickback pawls for safer operations. Integrated guarding plus on-board storage for the blade guard assembly, miter gauge, and two blade change wrenches keeps accessories with the saw. Jobsite crews who need quick setup and organized transport gain practical value from this DEWALT Portable Table Saw accessory bundle.
Potential Drawbacks
Smaller blade limits depth of cut
The 8-1/4 in blade limits maximum depth of cut compared with common 10 in cabinet and contractor saws. Portable saw buyers who need deeper crosscuts or full-depth cuts in thick stock may find reduced capacity. Users who routinely mill large timbers or thick hardwood slabs should consider a 10 in saw rather than DWE7485WS.
Motor suited to portable, not heavy-duty, milling
The 15 A, 5800 RPM motor is appropriate for portable ripping but is less powerful than higher-Horsepower 10 in saws. This limits sustained heavy cuts in dense hardwood or when using dado stacks beyond light-duty use. Contractors who perform extensive hardwood milling or heavy-duty resawing may see this as a weakness for DEWALT DWE7485WS.
Limited technical documentation for planning
While blade size and motor rpm are specified, data regarding weight, power cord length, and warranty terms was not available, which limits planning and usage decisions. Lack of weight and cord-length specifications complicates shipping, lifting, and site placement planning for teams. Buyers needing precise logistics or compliance information should note that current specifications do not list those details for the reviewed DEWALT Portable Table Saw (DWE7485WS).
Rip capacity may be insufficient for some users
The 24.5 in rip capacity, while suitable for most sheet goods, does not accommodate wider ripping needs beyond that range. Users who must rip full-width panels into large dimension lumber or who need repeat extra-wide cuts will be constrained. Shops and fabricators expecting to perform very wide rips should evaluate larger-capacity table saws instead of DWE7485WS Table Saw.
Overall, the reviewed DEWALT DWE7485WS table saw balances portability, a 15 A motor, and a 24.5 in rip fence with practical safety features, but buyers who require deeper cuts, higher sustained power, or detailed logistics specifications should weigh those limitations when deciding if they should buy this DEWALT Portable Table Saw.
Shopper Purchase Insights & Customer Feedback
17 shoppers researched this product and shared detailed feedback. These insights reveal how shoppers evaluate the DEWALT Portable Table Saw with Stand, 8-1/4 inch, up to 48-Degree Angle Cuts (DWE7485WS) at $349.
Primary Purchase Motivation
Understanding your specific need helps match this product’s capabilities to your situation.
First-time purchase in this category
8 (57%)
Upgrade from cheaper model
3 (21%)
Replace broken Table Saws
2 (14%)
Gift or business purchase
1 (7%)
Budget & Price Sensitivity
How does $349 fit your budget for this Table Saws?
Ready to buy at this price
4 (31%)
Waiting for better deal
5 (38%)
Price seems too high
3 (23%)
Would buy at $276 (21% off)
1 (8%)
Potential Concerns & Limitations
What concerns might prevent you from purchasing?
Size or space constraints
4 (31%)
Missing features I need
4 (31%)
Uncertain about reviews
2 (15%)
Considering alternatives
3 (23%)
Purchase Decision
Would you purchase the DEWALT Portable Table Saw with Stand, 8-1/4 inch, up to 48-Degree Angle Cuts (DWE7485WS) at $349?
Yes, Planning to Buy
Not Sure Yet
Current Ownership
Do you already own a Table Saws?
Yes, I Own One
No, First Purchase
Review Guide Helpfulness
Did this buying guide help you make a more informed decision?
Very Helpful
Not Helpful
Owner Satisfaction & Performance Reviews
Metrics derived from purchase intent and ownership data
Summary: 67% would purchase at $349. Data from 85 total responses across 17 shoppers (February 2026). Top use case: 57% first-time buyers. Top concern: 31% cite size/space constraints.
Data current as of February 2026 | Based on buyer research patterns and customer feedback
DEWALT Portable Table Saw with Stand, 8-1/4-inch, DWE7485WS Price History & Tracking
Current Price: $349 (March 1, 2026)
💡 $17.45 lower than last month’s low – it is likely a good time to buy.
Price Data (Last 90 Days)
- Best Price: $349 at Amazon on January 22, 2026
- Highest Price: $418.8 at Home Depot on October 21, 2025
- Typical Range: $342.02-$418.8 across retailers
Monthly Averages
- February 2026: Avg $366.45 (Amazon $349, Home Depot $355.98, Lowe’s $359.47)
- January 2026: Avg $373.43 (Amazon $355.98, Home Depot $366.45, Acme Tools $383.9)
- December 2025: Avg $383.9 (Amazon $369.94, Toolbarn $383.9, Acme Tools $397.86)
When’s the best time to buy the DEWALT Portable Table Saw with Stand, 8-1/4-inch, DWE7485WS?
This month historically offers the best deals, with prices dropping over time 13% below last year’s average. Amazon typically has the most competitive pricing. This product shows lower price volatility (10% fluctuation) compared to similar products (7% swings).
📊 Methodology: Daily tracking since Sept 2024 via Amazon API, Lowe’s API, Acme Tools feeds. 92% accuracy. Updated: Mar 1, 2026.
Frequently Asked Questions
Is DEWALT DWE7485WS a good buy?
Yes, the DEWALT DWE7485WS offers a balanced mix of power, accuracy, and portability. Its 15 A motor, 8-1/4-inch blade, rack-and-pinion fence, and SITE-PRO guarding make it a capable compact table saw for contractors and hobbyists. This makes it a strong choice for users needing a reliable jobsite saw.
What are the benefits of DEWALT DWE7485WS for carpenters?
The DEWALT DWE7485WS delivers precise rips and versatile bevel cuts that benefit carpenters. Rack & pinion telescoping rails, 24.5-inch rip capacity, 48-degree max bevel, and the 15 A motor support repeatable joinery and trim work. This helps carpenters complete on-site framing, finish, and cabinetry efficiently.
How much rip capacity does DEWALT DWE7485WS have?
The DEWALT DWE7485WS has a 24.5-inch rip capacity that rips 4×8 sheet goods. Rip capacity, rack-and-pinion fence, and the compact table provide accurate fence alignment and material support for panel ripping. This lets contractors and DIYers handle sheet goods without a separate track saw.
Can DEWALT DWE7485WS cut bevels to 48 degrees?
Yes, the DEWALT DWE7485WS cuts bevels up to 48 degrees. Its bevel mechanism, miter gauge compatibility, and 8-1/4-inch blade support compound cuts and angled joinery in carpentry workflows. This enables complex trim and molding cuts on the jobsite or in the shop.
Does DEWALT DWE7485WS come with a stand?
Yes, the DEWALT DWE7485WS includes the DW7451 heavy-duty tube steel stand. The stand, support bar hardware holes, and compact design combine with on-board storage to stabilize the saw and store blade guard and wrenches. This improves setup speed and site mobility for contractors.
What size blade does it use?
The saw uses an 8-1/4-inch blade for cutting. Blade size, 15 A motor RPM, and riving knife alignment affect cut quality, kerf width, and material feed in table saw operations. This suits crosscuts, rip cuts, and common trim work on jobsites.
Is it good for jobsite use?
Yes, it is designed for jobsite use with a compact build and transportable stand. Features like the DW7451 tube steel stand, on-board storage, SITE-PRO guarding, and 24.5-inch rip capacity target jobsite workflow and safety. This makes it useful for framers, finish carpenters, and mobile contractors.
How portable is it?
The saw is compact and built for transport, making it reasonably portable for crews. The included DW7451 stand, compact chassis, and on-board storage reduce setup time and fit into vans or trucks for site movement. This supports contractors who move between multiple jobs daily.
Will it run on a standard 15A circuit?
Yes, the saw runs on a standard 15 A circuit using its 15 A electric motor. Circuit requirements, motor amperage, and RPM specifications inform safe operation; ensure dedicated circuit and proper supply to avoid tripping breakers. This is important for jobsite electricians and tool planning before work.
Is it worth the price?
Yes, the saw provides strong value for $349 through its power, rip capacity, and included stand. Category nouns like a 15 A motor, 8-1/4-inch blade, rack & pinion fence, and SITE-PRO guarding deliver professional table saw features in a portable package. This appeals to buyers seeking a capable jobsite saw without heavy premium cost.
Is the DEWALT Portable Table Saw with Stand, 8-1/4-inch, DWE7485WS Right For You?
Use our interactive fit checker to see how well this product aligns with your specific requirements.
Your Personalized Match Score
50%
Why this is a fit:
Potential Trade-offs:
Final Verdict & Buying Advice
DEWALT Portable Table Saw with Stand, 8-1/4-inch, DWE7485WS sells for $349 and pairs an 8-1/4 inch blade with a 15 A, 5800 RPM motor and a 24.5 in rip capacity. The DEWALT DWE7485WS uses a rack & pinion fence and the SITE-PRO guarding system with a riving knife and anti-kickback pawls. The DEWALT Portable Table Saw offers up to a 48-degree bevel for angle work while mounted on the included DW7451 stand. The DWE7485WS Table Saw is compact for transport, but specific weight and cord length were not available during our analysis.
Buy If You…
This product excels in three specific scenarios:
- If you frequently rip 4×8 sheet goods and need a portable solution, the reviewed DEWALT DWE7485WS table saw gives a 24.5 in rip capacity that handles full sheet cuts. The rack & pinion telescoping fence keeps the fence parallel during long rips. This avoids renting a jobsite saw and saves rental costs of about $60 per day for multiple-day projects.
- If you work on angled trim and need deep bevels, DWE7485WS Table Saw tilts to 48 degrees for compound cuts. The on-board miter gauge and bevel scale make angle setup straightforward. This reduces the need for separate beveling tools, saving roughly $80–$150 on an extra compound saw.
- If you move between job sites and value quick setup, DEWALT Portable Table Saw locks to the DW7451 stand and stores guards on-board. The power-loss reset prevents accidental restarts after power interruptions. This lowers downtime risk and can avoid costly safety incidents that might otherwise delay work by hours.
Skip If You…
Two deal-breakers make this the wrong choice:
- If you need a larger rip capacity for cabinet panels beyond 24.5 in, consider DEWALT Table Saw 10 Inch with Rolling Stand, DWE7491RS at about $649. The DWE7491RS gives a 32.5 in rip capacity and a rolling stand for bigger sheet handling. That larger rip capacity and wheeled stand make it better for full-size cabinet and hardwood flooring work.
- If you require a full 10-inch blade and higher trueness for heavy hardwood, consider SKIL TS6307-00 at about $286.05. The SKIL TS6307-00 includes a 10 in blade and a 25.5 in rip capacity in a larger cast table. Its larger arbor and tabletop make thick hardwood resawing easier than the smaller 8-1/4 inch arbor on the DWE7485WS.
Value Calculation
At $349, the DEWALT DWE7485WS costs roughly half of a larger 10-inch jobsite saw priced near $649. If you avoid a single week of tool rental at about $200, the DWE7485WS pays for itself on a medium project. The integrated stand and onboard storage reduce accessory purchases worth about $30–$80.
Where to Buy
- Amazon: Known for broad tool selection and fast delivery. Benefits include free 30-day returns and expert phone support.
- Home Depot: Known for home improvement and in-store demos. Benefits include same-day pickup and price matching.
- Lowe’s: Known for contractor-focused inventory. Benefits include same-day pickup and expert phone support.
- Acme Tools: Known for professional-grade tools and kits. Benefits include price matching and expert phone support.
Accessories & Frequently Bought Together
Common accessories purchased with this product include:
- 8-1/4-inch carbide-tipped rip blade: Cleaner cuts and longer blade life
- Featherboard and push stick kit: Safer edge control during rips
- Blade wrench set (for DWE7485WS): Faster blade changes on-site
- Zero-clearance insert (8-1/4 inch): Reduces tear-out on thin plywood
- Dust collection adapter (2-1/2 inch): Connects to vacuums for cleaner jobsites
The DEWALT DWE7485WS suits carpenters and remodelers who need a portable saw with a 24.5 in rip and 48-degree bevel capacity. Buyers who need larger rip capacity or a 10-inch blade should avoid this model. The core trade-off is compact portability and practical safety features versus the raw capacity of larger 10-inch jobsite saws.
Technical Terms Explained
To help you make the most informed decision, here are clear explanations of the technical terms used in this guide:
- Rip Capacity
- The maximum distance from the blade to the fence (24.5 inches on this model) that determines the widest piece you can rip in a single pass, large enough to handle 4×8 sheet goods down the long edge.
- Rack & Pinion Fence
- A geared telescoping fence system that moves the fence smoothly and precisely across the table for repeatable, accurate long rip cuts.
- Riving Knife
- A thin metal plate mounted behind the blade that moves with blade height to prevent the cut kerf from closing and reduce the risk of kickback during through-cuts.
- Anti-Kickback Pawls
- Spring-loaded teeth that engage the workpiece if it kicks back, helping to stop the board from being thrown toward the operator.
- SITE-PRO Guarding System
- DEWALT's modular blade-guard and riving-knife assembly on this saw that provides on-board safety protection and can be reconfigured for different cut types.
- Bevel Angle (48° max)
- The maximum blade tilt relative to the table (up to 48 degrees) allowing the saw to make steeper angled and compound cuts than the common 45-degree limit.
- 15 A (Amperage)
- The electrical current rating of the saw's motor (15 amps), indicating it is designed to run on a standard 15-amp circuit used at most job sites and homes.
- 5800 RPM
- The motor's rotational speed of 5,800 revolutions per minute (no-load spec), which influences cutting speed and the finish quality of cuts.